Flue Components

We have sourced a stronger vitreous enamelled flue, available in 5" and 4" diameters.

This comes in one metre and half metre lengths.

 The flue sections fit together exceptionally well, and do not necessarily need any seal between them. The joined lengths are extremely rigid, and can be used over several feet without brackets.

A pair of 45 degree elbows is useful for taking a flue off to the side, and is recommended over using 90 degree elbows as it will not impede the draw so much.

For a more secure fixing where necessary.

Adjustable 50-250mm from wall

These are made exclusively for the Windy Smithy, and clamp securely onto a 100mm to 150mm vitreous flue.

 Won't fly off while you are driving along!

This class 1 twinwall flue, manufactured in Devon, will give a better draw and has a lower external temperature.

Recommended in situations where the flue temperature is a concern or a greater draw is required, this is available in 100mm (4") and 130mm(5") sizes. 

You will need an adapter from single wall flue or from the stove, and a cowl (hat) on top.

Usually start with a section of single wall flue, and start the insulated flue at least 200mm from the ceiling, this is ideal for passing through the roof.

Available in various lengths, elbows and Ts.

One metre length £120 

Half metre length £ 85

45 degree elbow £ 90

You will need to have a Rain Hat as a termination on the twinwall flue system.

A lot more streamlined than the hat on our previous twinwall systems.

£50

To support the twinwall flue to a solid wall.

Roof/ Rafter Support  £55

A self adhesive fibreglass tape , used to seal the flue into the top of the stove, especially useful in mobile applications.

This can also be used to seal lengths of vitreous flue together and to seal the twinwall adapter to the vitreous flue.

Simply wrap around the male end of the flue, overlapping the end slightly.

Sold by the metre.