Vitreous Enamel Flue pipe

We have sourced a lighter, stronger and cheaper flue, available in 100mm and 130mm diameters. This comes in 1m and 500mm lengths.

The flue sections fit together exceptionally well, and do not necessarily need any seal between them. The joined lengths are extremely rigid, and can be used over several feet without brackets.

1m length £35 / 500mm length £20

Adjustable length (550-860mm) £55

45 degree bend £30

Witches’ Hat (Cowl)

These are made exclusively for the Windy Smithy, and clamp securely onto a 100mm or 130mm vitreous flue.

Won't fly off while you are driving along!

Hat (Cowl) £35

Brackets for vitreous flue

For a more secure fixing where necessary.

Adjustable 50-250mm from wall
100mm or 130mm £15
Guy Bracket £15

Twinwall Insulated Flue pipe

Recommended in situations where the flue temperature is a concern, these are available in 100mm and 130mm sizes.
You will need an adapter from single wall flue, and a cowl (hat) on top.
Usually start with a section of single wall flue, and start the insulated flue at least 200mm from the ceiling.


Flue Adapter £40

Brackets for Twinwall


Wall Bracket 50mm fixed £20 / Wall Bracket 50-250mm £50

Stove Fixing Bolts

Fix the 2x lugs on opposite legs, through the floor,
with nut and washer below £7

Deflector Plate

To go behind the burner, stops the yurt trellis from getting too hot, or can be fixed 1/2” away from solid wall to act as a heat shield.

Large (1000x660mm) £30 / Small (660x500mm) £20

Enamel Kettle

£35

No extra charge for delivery if flue and accessories ordered with a Woodburner.

Normally a delivery charge of between £15 & £25 will apply.

More Flues available on request.